Company Overview

Based on registry data, the company reported turnover of 52,278,000 SEK in 2025. The organization operates with a focus on high-standard metalwork and industrial ventilation equipment, employing a welding coordinator with an IWS certificate.

Welding Quality Assurance and Certifications

The company is certified according to ISO 3834-3 and SS-EN 1090-1 for execution classes EXC 1 and EXC 2, which enables the CE-marking of its products. Quality assurance for the welding of construction products is primarily conducted according to ISO 3834 standards and EN 1090-2 requirements. This includes specific qualification methods for welding procedures and defined technical knowledge levels for supervision.

Welding quality requirements are applied based on execution classes: EXC 1 for basic quality requirements per ISO 3834-4, EXC 2 for normal quality requirements per ISO 3834-3, and EXC 3 and 4 for comprehensive quality requirements per ISO 3834-2. To maintain these standards, the company qualifies operators according to ISO 14732 and welders according to ISO 9606-1, while ensuring that welding supervision personnel possess technical knowledge in accordance with ISO 14731.

Metal Fabrication and Contract Welding

The company provides a range of services and products centered on metal fabrication, integrating laser cutting, bending, and welding within a single facility to eliminate transport between workshops. It offers contract welding for single items, series production, frames, parts, and constructions using steel and stainless steel.

Fabrication capabilities include working with construction steel, high-strength steel, corrosion-resistant steel, stainless steel, aluminium, and wear steel such as Hardox. To prevent surface contamination, stainless and acid-resistant steel are handled separately from carbon steel. The production process for welded parts follows a sequence of receiving CAD models or drawings, quoting, cutting and bending blanks, fixturing, welding according to Welding Procedure Specifications (WPS), and visual control per ISO 5817.

  • MMA (Manual Metal Arc): Used for on-site assembly and areas with limited accessibility. - MIG/MAG: Applied to non-alloy, low-alloy, stainless steels, and aluminium alloys, supporting sheet thicknesses from 0.5 mm upwards with low heat input for thin sheets to prevent deformation. - TIG: Used for high-alloy steels, stainless steel, and non-ferrous metals including monel, inconel, copper alloys, and aluminium.

Technical Welding Planning and Testing

As part of production planning according to ISO 3834, the company establishes welding plans that include welding data sheets, filler material details, and measures against deformation. These plans specify weld sequences, preheating temperatures, interpass temperatures, and post-weld heat treatment. Traceability of welds is maintained through identification requirements, and surface treatment follows EN 1090-2 section 10.

Non-destructive testing (NDT) is provided by personnel qualified to ISO 9712 level 3, utilizing RT or UT for butt welds and MT or PT for fillet welds. Weld discontinuities and form deviations are assessed according to ISO 5817, though 'Micro-porosity' (401) and 'Incorrect crater fill' (505) are excluded. Following a contract, the company provides steel documentation guaranteeing material quality, adherence to WPS and welding plans, and the use of qualified welders (EN 287). All work steps are managed via self-control and montage plans, with all deviations documented.

Industrial Fan Manufacturing and Energy Services

The company manufactures radial fans and flue gas fans. These products can be equipped with wheels made of aluminium, steel, or acid-resistant stainless steel. Fan wheels are developed using CAD design and are available with straight radial blades, flat backward-set blades, or backward-curved blades. The company supplies these fans in shaft coupling, belt drive, or direct drive configurations, including spark-proof models for explosive environments and units featuring IE3 classification energy-efficient motors.

  • Efficiency Calculations: Using the EffSave program to provide energy efficiency calculations for electric motors and compare life cycle costs. - Fluid Dynamics: Performing pressure and flow calculations to determine the most energy-efficient fan, including frequency control with flow or pressure regulation. - Balancing: Performing static and dynamic balancing of all delivered fan wheels via a stationary balancing machine, as well as providing on-site vibration measurement and balancing for wheels from other manufacturers.

Logistics and Payments

Laser-cut and bent sheet metal parts are delivered throughout Scandinavia. For customers within approximately 100 km of Katrineholm, the company uses its own vehicle to deliver welded constructions and perform assembly. Payments are accepted via bank transfer (Danskebank) and Bankgiro (5983-8706).